R21010002 Tool set in plastic modules 164 pieces

Socket wrench tools:

Coupler in acc. with DIN 3120, ISO 1174, with ball locking device

Square drive as per DIN 3120, ISO 1174, with ball retention groove

Chrome-vanadium steel, matt satin chrome-plated

2C reversible ratchet 1/4": To DIN 3120 - A 6.3, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle

Square plug-in handle 1/4", 1-component handle with female square

Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725

Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin

Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin

Socket extension 1/4"

Sliding T-handle with slide 1/4": Acc. to DIN 3122, ISO 3315

Universal joint 1/4": Joint bolted on, design to DIN 3123 - C 6.3

2C reversible ratchet 1/2": To DIN 3120 - A 12,5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle

Socket extension 1/2"

Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315

Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12,5

Socket, hex: Metric, short, to DIN 3124, ISO 272

Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin

Ratchet wrenches: Based on DIN 3113, ISO 3318, ring offset 15°, reversible for right and left-hand operation, 15° jaw position, surface matt satin chrome-plated

Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated

Chromium vanadium steel

Flat ring spanner: To DIN 838, ISO 3318, ISO 1085, ISO 10104, 5° offset, chrome vanadium steel, surface matt satin, chrome-plated

Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated

Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, 2-component-handle, forged

Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, forged

Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged

Circlip pliers: To DIN 5254 Form A, straight precision tips, opening spring, DIN 471 for retaining rings, DIN 983

Acc. to DIN 5254 Form B, angled precision tips, opening spring, DIN 471 for retaining rings, DIN 983

Acc. to DIN 5256 Form C, straight precision tips, opening spring, DIN 472 for retaining rings, DIN 984

Acc. to DIN 5256 Form D, 90° angled precision tips, DIN 472 for retaining rings, DIN 984