7460 Z — 7471 Z Torque wrench DREMOMETER Z A+S

Technical advantage/Function:

Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustment, thereby representing more process reliability of the user

Classified according to DIN EN ISO 6789-2:2017 Type II Class A, incl. traceable test certificate, calibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard

Lightweight yet robust (as the housing is made of an aluminium alloy) and resilient, very workshop-friendly

Depending on the application, access is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).

Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwise, inaccuracies can evolve (except for model DXZ where the DREMOMETER has been calibrated and adjusted using the extension tube)

Operation only with end fittings with standardised depth gauges, otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories.

Large drive cross-section transfers maximum torques

Extremely low wear attributable to reduced forces in a lever mechanism

Forged lever chain from our group own quality forge

Maximum precision even when subjected to extreme continuous use

Easy operation - fast and safe torque tightening

Easy adjustment thanks to attractive adjusting button secured against loss at the end of the handle

With certificate acc. to DIN EN ISO 6789-2:2017, traceable via in-house DAkkS laboratory to national standards

Pre-set DREMOMETER for serial production wherever the same value always needs to be applied

If fixed setting at the factory is desired is required, please state the Nm value when ordering (price on request)